How Wide a Steel Coil Can a 10-Ton C-Hook Lift? Product Specs & Selection Guide

CASE 80

A 10-ton C-hook is widely used for horizontal steel coil transport in steel mills, warehouses and port yards. Many buyers ask one core question: what width of steel coil can this 10 ton C-lifter safely handle?

Rated load is not the only factor. Coil width, inner diameter and hook inner opening work together to decide safe lifting. Using a mismatched C-hook leads to coil slipping, edge damage and structural failure risks.

How Wide a Steel Coil Can a 10-Ton C-Hook Lift? Product Specs & Selection Guide(images 1)

Standard Coil Width for 10 Ton C-Hook

Most standard 10-ton C-hooks support steel coil width from 700 mm to 900 mm. Custom versions can extend to 1000 mm, 1200 mm or wider upon request.

Do not assume a 10-ton hook fits all coils under 10 tons. If the coil width exceeds the hook’s designed inner opening, the load will shift outward. It creates extra bending torque and breaks the safety limit even if the coil weight is below 10 tons.

Core Technical Parameters of 10T C-Type Lifting Tool

  • Rated working load: 10 Ton
  • Standard coil width range: 700 mm – 900 mm
  • Minimum coil inner diameter: ≥560 mm
  • Hook inner height: 650 mm
  • Material: Low alloy steel, box beam structure
  • Balance design: Built-in counterweight to keep horizontal balance in empty and loaded status
  • Optional accessory: Protective lining to avoid scratch on cold rolled coil surface

Key Selection Points When Buying 10 Ton C-Hook

  1. Confirm coil width first. Measure the actual face width of your steel coils before ordering. Wide coils need custom lengthened hook arms.
  2. Check coil inner diameter. The inner hole must be larger than the hook arm thickness. The hook prong needs full contact under the coil.
  3. Calculate working load margin. Keep 1.25 times safety factor for regular lifting. Hot rolling coil handling needs extra safety reserve.
  4. Match your crane connection. Confirm the bail size fits your overhead crane hook.
  5. Application environment. Choose heat-resistant material for hot coils, anti-wear lining for surface-sensitive cold rolled steel.

Common Mistakes to Avoid

Do not use a narrow standard C-hook for ultra-wide coils. Over-width loading will bend the hook body. Do not lift coils with inner diameter smaller than the hook requirement. The hook cannot seat properly. Do not modify the C-hook by cutting or welding to widen the opening. This voids the load rating and safety certification.

Maintenance & Inspection Tips

Check welds, hook arm deformation and lining wear before every shift. Do not overload the hook for temporary urgent jobs. Store the C-hook on dedicated support racks to prevent permanent bending.

A 10-ton C-hook is a cost-effective solution for steel coil lifting. Get the coil width, inner diameter and weight data ready, then pick standard or custom C-hooks to match your workshop handling needs.

The prev:

Related recommendations

Click Cancel to reply
    Expand more!